30° Horizontal Joiner Strip

Features:Four pre-tapped 5/16” holes accommodate Set Screws, Cap Screws, or Machine Screws for connecting beams and attachments.

Typical Use:An alternative to the 30° Vertical Joiner Strip to build a stable and neat framework corner from two Support Beams mated and connected end-to-end at a 30° mitered joint. The fitting is placed in the T-slots and clamped against the slot with Set Screws.

General Overview

Measurements

Specifications

Resource / Downloads

Additional information

Material	Mild Steel, Zinc Plated.
Weight	0.19 lb [0.09 kg]
Hardware Recommended for Assembly	5/16” - 18 x 5/16” Stainless Steel Set Screws (31C31KKCS), 4 each.