Four pre-tapped 5/16” holes accommodate Set Screws, Cap Screws, or Machine Screws for connecting beams and attachments.
Typical Use:
To mate and connect support beams in an end-to-end fashion when inserted into T-slots and fastened.
Can be used as a strap nut, a high-loading fastening method which allows for easy movement along the length of a T-slot. The strap nut can function in place of T-bolts and Double Square Nuts on Web Brackets, Corner Tab Brackets, etc. when a higher loading capacity is required. When used in this manner, the third and fourth pre-tapped holes, secured by Set Screws, can serve to further prevent slippage of the parts along the length of the T-slot.
General Overview
Measurements
Specifications
Resource / Downloads
Additional information
Materials
Mild Steel, Zinc Plated.
Weight
0.21 lb [0.10 kg]
Hardware Recommended for Assembly
For a Web Bracket:
• 5/16” - 18 x 5/8” Hex Head Cap Screws
(31C62HCS5Z), 2 each.
• 5/16” - 18 x 5/16” Stainless Steel Set Screw
(31C31KKCS), 1 each.
• 5/16” Flat Washers (68N34WSDZ/089), 2 each.
We know that your needs are unique. That's why we aim to answer all your questions and to provide tailored solutions! Schedule a consultation today to get started on your next project.
